May 11, 2020
Until more information becomes available, precautions should be taken in handling specimens that are suspected or confirmed for SARS-CoV-2. Timely communication between clinical and laboratory staff is essential to minimize the risk incurred in handling specimens from patients with possible SARS-CoV-2 infection. Such specimens should be labeled accordingly, and the laboratory should be alerted to ensure proper specimen handling. General and specific biosafety guidelines for handling SARS-CoV-2 specimens are provided below. For additional information on handling SARS-CoV-2 specimens, refer to the Laboratory Biosafety Frequently Asked Questions.
All laboratories should perform a site-specific and activity-specific risk assessment to identify and mitigate risks. Risk assessments and mitigation measures are dependent on:
- The procedures performed
- Identification of the hazards involved in the process and/or procedures
- The competency level of the personnel who perform the procedures
- The laboratory equipment and facility
- The resources available
Follow Standard Precautions when handling clinical specimens, all of which may contain potentially infectious materials. Standard Precautions include hand hygiene and the use of personal protective equipment (PPE), such as laboratory coats or gowns, gloves, and eye protection.
Follow routine laboratory practices and procedures for decontamination of work surfaces and management of laboratory waste.
Routine Viral Testing
Routine viral testing of specimens, such as the following activities, can be handled in a BSL-2 laboratory using Standard Precautions:
- Using automated instruments and analyzers
- Processing initial samples
- Staining and microscopic analysis of fixed smears
- Examination of bacterial cultures
- Pathologic examination and processing of formalin-fixed or otherwise inactivated tissues
- Molecular analysis of extracted nucleic acid preparations
- Final packaging of specimens for transport to diagnostic laboratories for additional testing (specimens should already be in a sealed, decontaminated primary container)
- Using inactivated specimens, such as specimens in nucleic acid extraction buffer
- Performing electron microscopic studies with glutaraldehyde-fixed grids
Decentralized and Point-of-Care Testing
Point-of-Care (POC) tests are intended to supplement laboratory testing, making testing available to communities and populations that cannot readily access laboratory testing, and bolstering testing to quickly address emerging outbreaks. Examples of potential uses for POC instruments for COVID-19 diagnostic purposes include:
- Deployment to rural hospitals or other critical care sites that lack widely available testing.
- Use at public health department testing sites that perform CLIA-waived testing for other purposes.
- Deployment to long-term care facilities or correctional institutions.
- Rapid deployment to aid in the investigation of a newly identified case cluster.
- Placement in public health laboratories to test high-priority specimens that require a rapid result.
Regulatory requirements and necessary CLIA documentation need to be considered when deploying instruments to these settings if they are not currently performing other POC testing. Testing sites that operate a POC diagnostic instrument must have a current Clinical Laboratory Improvement Amendments of 1988 (CLIA) certificate. During the COVID-19 public health emergency, the Centers for Medicare & Medicaid Services (CMS) will permit a laboratory to extend its existing Certificate of Waiver to operate a temporary COVID-19 testing site in an off-site location, such as a long-term care facility. The temporary COVID-19 testing site is only permitted to perform waived tests, consistent with the laboratory’s existing certificate, and must be under the direction of the existing lab director.
Laboratories should consider the following when using POC instruments for SARS-CoV-2 diagnostic purpose:
- Use the instrument in a location associated with a current CLIA certificate.
- Perform a site-specific and activity-specific risk assessment to identify and mitigate safety risks.
- Train staff on the proper use of the instrument and ways to minimize the risk of exposures.
- Follow Standard Precautions when handling clinical specimens, including hand hygiene and the use of PPE, such as laboratory coats or gowns, gloves, and eye protection. If needed, additional precautions can be used, such as a surgical mask or face shield, or other physical barriers, such as a splash shield to work behind.
- When using patient swabs, minimize contamination of the swab stick and wrapper by widely opening the wrapper prior to placing the swab back into the wrapper.
- Change gloves after adding patient specimens to the instrument.
- Decontaminate the instrument after each run by using an EPA-approved disinfectant for SARS-CoV-2. Following the manufacturer’s recommendations for use, such as dilution, contact time, and safe handling.
For additional information, refer to:
Procedures with a High Likelihood to Generate Droplets or Aerosols
For procedures with a high likelihood to generate aerosols or droplets, use either a certified Class II Biological Safety Cabinet (BSC) or additional precautions to provide a barrier between the specimen and personnel. Examples of these additional precautions include personal protective equipment (PPE), such as a surgical mask or face shield, or other physical barriers, like a splash shield; centrifuge safety cups; and sealed centrifuge rotors to reduce the risk of exposure to laboratory personnel.
Site- and activity-specific biosafety risk assessments should be performed to determine if additional biosafety precautions are warranted based on situational needs, such as high testing volumes, and the likelihood to generate infectious droplets and aerosols.
Environmental Specimen Testing
Procedures that concentrate viruses, such as precipitation or membrane filtration, can be performed in a BSL-2 laboratory with unidirectional airflow and BSL-3 precautions, including respiratory protection and a designated area for donning and doffing PPE. The donning and doffing space should not be in the workspace. Work should be performed in a certified Class II BSC.
This guidance is intended for only those laboratories that perform virus concentration procedures, such as wastewater/sewage surveillance testing, not public health or clinical diagnostic laboratories that handle COVID-19 clinical specimens or laboratories that perform culture and isolation of SARS-CoV-2. Site- and activity-specific biosafety risk assessments should be performed to determine if additional biosafety precautions are warranted based on situational needs, such as high testing volumes or large volumes, and the likelihood to generate infectious droplets and aerosols.
Virus isolation in cell culture and initial characterization of viral agents recovered in cultures of SARS-CoV-2 specimens should only be conducted in a Biosafety Level 3 (BSL-3) laboratory using BSL-3 practices. Site- and activity-specific biosafety risk assessments should be performed to determine if additional biosafety precautions are warranted based on situational needs.
Decontaminate work surfaces and equipment with appropriate disinfectants by using an EPA-approved disinfectant for SARS-CoV-2external icon. Following the manufacturer’s recommendations for use, such as dilution, contact time, and safe handling.
Laboratory Waste Management
Handle laboratory waste from testing suspected or confirmed COVID-19 patient specimens as all other biohazardous waste in the laboratory. Currently, there is no evidence to suggest that this laboratory waste needs any additional packaging or disinfection procedures
Specimen Packing and Shipping
Pack and ship suspected and confirmed SARS-CoV-2 patient specimens, cultures, or isolates as UN 3373 Biological Substance, Category B, in accordance with the current edition of the International Air Transport Association (IATA) Dangerous Goods Regulationsexternal icon. Personnel must be trained to pack and ship according to the regulations and in a manner that corresponds to their function-specific responsibilities.